Sahkaar Quick 630(C3TE)

The highly polymerized, grey-colored Sahkaar Quick 630 is developed with unique qualities like water resistance, slip resistance, flexibility, and extended open time. Additionally, it can be applied to interior, exterior, and wet spaces. It is also suitable for all natural stone tiles as well as ceramic, clay, basalt, vitrified, glass mosaic, and porcelain tiles.

All SAHKAAR branded products are manufactured under strict quality control supervision as per exact manufacturing specification. Should you find the behavior of the products varying from the claims in the data sheets, please stop the use of the product and claims the nearest SAHKAAR INFRA Staff or the Distributor for further guidance.


  • No shrinkage
  • Increase productivity
  • No curing required
  • Highly water resistant
  • No need for hacking
  • Excellent adhesion to base plaster/concrete surface

Primary Uses

SAHKAAR Quick 630 is suitable for interior and exterior floors applications


For a 3mm bed thickness the coverage will be 2-2.5 sq ft/kg (Note: The coverage will vary depending upon the surface undulations.)

How to apply

  • Clean the wall surface by wire brush & potable water
  • Take approx.200-300 ml of clean water for 1 Kg of SAHKAAR Quick 630 in a clean bucket. It is very important to add material into water and not vice versa
  • Stir continuously for 3-5 min. to obtain a homogeneous paste
  • Allow the resultant paste to stand for about 10 min.
  • Re-mix again for about 2 min. The mixture is now ready to apply
  • Apply the material with 6mm notched trowel. spread it evenly
  • Fix the tile and remove excess mixture and clean it with a cloth


  • Available in Grey & White powder
  • Tested according to IS 15477:2019 – TYPE II
  • Graded Sand, Cement, Selected Fillers, Polymers
  • Packaging: 20 & 40 kg. BOPP bag

Technical Specifications

  • SPREADABILITY: Spread easily with good notchability
  • OPEN TIME: >5 minutes
  • ADJUSTABILITY > 5 minutes
  • POT LIFE >30 minutes
  • DENSITY: 1.5-1.9 g/ml
  • TENSILE ADHESION STRENGTH (After 28 days): 1.5 N/mm2
  • SHARE ADHESION STRENGTH (After 28 days): 1.5 N/mm2